Everything You Need to Know about Water Resistant Plywood
Plywood has been an ever-present material essential to the construction industry. It has been used in various ways when building a home and has gained popularity as a decorative material. Plywoods of different types and sizes are used in walls, floors, kitchens, bathrooms, etc. However, its use is not limited to home construction but covers other verticals of life as well.
For example, a ship and aircraft that carry several people in the middle of the sea and above the earth’s surface also require plywood for some usage. It shows how necessary plywood is vital for various objectives.
One exciting type of plywood is water resistant plywood. It is used in bathrooms and kitchens where the water source is nearby.
Here’s everything that you need to know about water-resistant plywood
Some interesting points about Water-resistant plywood
- The water resistant plywood lasts longer than your average commercial plywood.
- It has multiple layers. The front and back of the plywood can be made up of different types of materials.
- A side view of the ply should be enough for anyone to see the layers of different materials.
- Phenol resins make marine plywood water-resistant as that holds the ply together.
- Water-resistant plywood is known for its strength to hold on to the screws more efficiently than other types of plywood.
- It is also resistant to algae, fungus, mold, termites, and other such issues that may plague different kinds of plywood.
- You can place a layer of veneer over it.
- Water-resistant plywood is cheaper than wood, and so it might come to serve as a more economical alternative.
- These types of plywood are used in utility areas or areas close to the water source.
- These plywoods come with a certification to make clear their water-resisting quality. They are marked as IS: 303 to make them easier to identify.
The waterproof plywood price can vary from a few hundred rupees to a few thousand, depending on the brand and seller. A 3.5mm, thick marine ply with 8×4 dimensions can cost around 1048 rupees plus GST. So it is not that expensive and comes in handy, especially when dealing with an area exposed to water, moisture, or humidity. However, it is different from water-resistant plywood, which is available for the exact measurements and readings at 839 rupees. The difference between the two can easily confuse anyone, so here we break it down for you to understand.
BWR and BWP stand for boiling water-resistant plywood and boiling waterproof plywood, respectively. BWP is the heavier of the two because of its total waterproofing ability. So, it also goes without saying that BWP is also pricier than BWR.
Meanwhile, water resisting and proofing capacity are not even a point of contention, as BWP plywood deals with water more efficiently than BWR. However, the latter is good at resisting it to a certain extent. Furthermore, their ability to deal with water also dictates how they fare against algae, fungi, termites, etc. Lastly, BWR is less durable compared to BWP, but then again, they both are stable.
In 2018, the water-resistant plywood of 6-18mm had a market share of 74 percent globally, and it is only expected to grow to ×3/4 times by 2028. It demonstrates how important plywood has become, and people finally understand the difference between water-resistant plywood and ordinary plywood.
The Bottom Line
Dealing in plywood might seem difficult for some people. However, they can get help from the ever-so-reliable Sylvan Ply. We produce the best plywood, consult with our customers and resolve their issues related to it, so they are your one-stop solution for all kinds of ply requirements. The company gets my thumbs up for its service in the play area.
Next time you have a house to build or a shop to decorate, you know where you need to head to have the best plywood. You can choose from various ranges and designs that suit your requirement.